You are buying an assembled and tested Amiga Floppy Drive adapter.
This smaller "Mini" version is intended for direct attachment to the rear of a floppy drive.

This version comes with power and drive activity LED indicators installed.
The floppy drives shown in some pictures are for demonstration purposes only and not part of the auction.

This adapter can make most standard PC floppy drives work on an Amiga computer (as DD drives only!).
This "Mini version 2 " of the adapter will fit most drives, but requires a few millimeters of space below the drive as it extends downwards. In most Amiga computers this shouldn't be a problem as the drives are mounted on stand-offs.

I have tested the following drive models as working "out of the box":
- Panasonic JU-256A198PC
- Teac FD-235HF
- Panasonic JU-257A606P
- Sony MPF920

All required settings jumpers for PC floppy drives are preconnected on the PCB, but could be modified by cutting traces if required.
The Amiga device selection comes with a jumper to select DF0, DF1, DF2 or DF3. Some Amigas require to connect the _MTRX signal from the mainboard to pin 16 of the adapter's input connector to make anything higher than DF0 work. Gotek drives or other similar devices without real motor may not require this signal.

This device will work with any classic Amiga computer (A1000, A500, A600, A1200, A2000, A3000, A4000).

Most games and demos will work fine. No special software or driver is required.

This adapter requires an additional power wire with two female 4-pin connectors.
Check for correct polarity as printed on the adapter, otherwise the device may be damaged.
Another power cable and standard 34-wire ribbon flat cable have to be attached from the Amiga to the adapter.

Write a review

Please login or register to review

Amiga Floppy Drive Adapter - Mini version 2 - direct connection to back of drive

  • Brand: HAKKE
  • Product Code: Amiga Floppy Drive Adapter Mini 2
  • Availability: 5
  • US$22.50


Related Products

Amiga Floppy Drive Adapter for internal / external connection - assembled

Amiga Floppy Drive Adapter for internal / external connection - assembled

You are buying an assembled and tested Amiga Floppy Drive adapter for internal or external use.This ..

US$24.50

Amiga Floppy Drive Adapter - Mini version 1 - direct connection to back of drive

Amiga Floppy Drive Adapter - Mini version 1 - direct connection to back of drive

You are buying an assembled and tested Amiga Floppy Drive adapter. This smaller "Mini" version is in..

US$23.50

Amiga Floppy Drive Adapter for external connection - assembled

Amiga Floppy Drive Adapter for external connection - assembled

You are buying an assembled and tested Amiga Floppy Drive adapter for external use.This adapter can ..

US$22.50

Tags: Amiga, Floppy, Drive, Adapter, internal, mini, direct, connection, assembled